NX32 SBC -3CX Pre Loaded SBC
SOFTWARE : Pre Loaded 3CX SBC .
CPU : Intel Atom
RAM : 4GB DDR3
COLOR : Black
Ethernet Ports : 2 (100 Mbps Speed)
Warrenty : 1 Year
HOW IT WORKS
The image above demonstrates how the 3CX SBC works. In this example, 3CX Phone System is on IP Address 10.0.0.181, and listens on TCP port 5090 (by default) for incoming Tunnel traffic. We must set up a single Port Forwarding rule on the NAT/Firewall Device, telling it that all incoming TCP and UDP traffic received on port 5090 should be delivered to LAN IP Address
The remote setup is shown on the left hand side of the cloud. In this example, the machine with IP address of 192.168.0.2 has the 3CX app installed. We will need to tell the VoIP Phone the public IP address of the PBX Server (which in this case is 220.127.116.11), and also the private IP address of the PBX Server (which in this case is 10.0.0.181). Since the 3CX app will by default use the standard port numbers used by 3CX, typically no further configuration is necessary.
The 3CX SBC can be used in the following scenarios:
2* USB 2.0 for external storage or disaster recovery system
2 (100Mbps speed)
3CX pre installed (Debian)
|Ether Net cable||1|